Mig 385S 385 A, step-regulated MIG/MAG machine with separate wire feed unit. Aircooled with fixed 1.5 m intermediary cable for welding with solid and flux-cored wires in steels, stainless steels and aluminium. CUSTOMER SEGMENT Light industry x Medium industry x Heavy industry E.g. Smiths, small machine works, equipment pools, repair companies, lorry construction, etc. TECHNICAL DATA Mains voltage 3 x 400 V Fuse 3 x 16 A Open circuit voltage, min. 17.4 – 19.2 V Open circuit voltage, max. 41.6 – 45.4 V Voltage steps 24 Duty cycle 100% 240 A/26.0 V Duty cycle 60% 300 A/29.0 V Duty cycle 35% 335 A/30.8 V Current range 40-385 A/16–30.8 V Inductance tappings 2 Mode switch 2T/4T/Spot Wire speed 1.7 – 18 m/min. Dimensions, lxwxh, cm 94 x 51 x 143 Weight, kg 163
FACILITIES ADVANTAGES BENEFITS Flexible Accurate, variable wire speed and 24 voltage steps. Welds in thin to medium thick steels, stainless steels and aluminium with all types of shielding gases. 4-roll wire drive Stable infinitely variable wire feeding. Stable welding parameters. Dynamic properties Excellent arc ignition and almost spatter-free welding. Less after-treatment required. Reliable The electronics are encapsulated to protect them against dust. Long lifetime. Separate wire feed unit with control panel for adjustment of wire speed and secondary parameters. Extended range of action. Efficiency and operational comfort. Dialog torch It is possible to adjust the welding wire during the process. Offers optimum welding characteristics. Service-friendly Exchange system of spare parts. Less time spent on production stops. Setting of secondary parameters. Soft start, burn back, postflow, spot welding time and choice of inductance. The machine can be adapted to the individual welder/welding process. Automatical short-circuiting protection Overload of the machine is not possible. Breakdowns are avoided.