PW - 300XP PLASMA 200XP / 300XP is the welding power source for Plasma Welding with IGBT inverter technology and can increase the productivity by high penetration and welding speed. Compared with TIG welding, plasma welding has narrow arc length to make the welding bead sharper and clearer. Normally plasma welding is equipped with welding automation system.    Features High Penetration Arc angle below ?10° makes penetration deep for high quality welding. Suitable for welding automation Less Consumption of Torch Parts High Productivity and Cost Reduction 100% Arc Start.   Standard Specification Mains : 220V (+/-10%), 1/3P, 50/60Hz Output Current : 5 ~ 200A : 5 ~ 300A Input Wattage : 8KVA : 11KVA (8Kw) Rated Load Voltage : 35-40V : 30-45V No Load Voltage : 100V Start Current : 5 ~ 200A : 5 ~ 300A Crater Current : 5 ~ 200A : 5 ~ 300A Pulse Base Current : 5 ~ 200A : 5 ~ 300A Pilot Arc Current : 5 ~ 200A : 5 ~ 300A Pilot Gas : 0.1 ~ 2.0 l/min Shield Gas : 0.5 ~ 15 l/min Duty Cycle : 100% Slope Time : UP 0.1 ~ 10sec DOWN 0.1 ~ 15sec Pulse Frequency : 0.5 ~ 200Hz Pulse Width : 5 ~ 85% Gas Flow Time : PRE 0.1 ~ 5sec POST 0.1 ~ 15sec Dimension : 400*600*650mm Net Weight : 60kg